SERVICING AND MAINTENANCE

My Kadeka product has been functioning well for several years. However, I need to change the gasket. Is it possible?

Yes, you can do so. However, kindly note that for Wine Chiller models KA45WR and KA165T, beverage showcases as well as selected models of chest freezers, the lock can only be replaced via replacing the door assembly. For replacement of lock, kindly contact...

<ul style="list-style: none; padding-left: 0;">
<li><strong>Step 1:</strong><br />Power off the set.</li>
<li><strong>Step 2:</strong><br />Check the area around the set to locate the ...

<ul style="list-style: none; padding-left: 0;"> <li><strong>Step 1:</strong><br />Power off the set to defrost machine.</li>
<li><strong>Step 2:</strong><br />Wash & clean the chest ...

Press & hold the ‘UP’ & ‘DOWN’ temperature buttons together for 3-5 seconds. The temperature will change from °F to °C. The same method applies when you need to change from °C to °F.

You will need to contact us through our hotline @ 62889190 (Press 2 for Service) or email us @ cservice@capital.com.sg for arrangement of onsite assessment of your wine chiller.

You may try the following:

Step 1:
Power off your Kadeka product. Power on your set again at another main socket.

Step 2:
Monitor if the set works & check if there’s any sign of power trip...

You may try the following:-
Step 1: Make sure you have set the temperature to your desired temperature. E.g. 12°C.
Step 2: Check the surrounding/environment. If the weather is too warm, set the wine chiller...

Minimal amount of noise & vibration may be produced when your Kadeka product is powered on. This is due to the flow of the refrigerant. As each cycle ends, you may hear some gurgling sound. Contraction & expansion of the inside walls may also cause some...

You may try the following:-
Step 1: Make sure you have set the light button to ‘ON’ mode.
Step 2: Check if there’s any power trip
Step 3: Check if the bulb is blown

If the issue...

Condensation will form on the glass panels/doors due to high humidity within the area where the Kadeka product is located. Sufficient ventilation also helps to reduce the condensation. If the issue persists, kindly contact us through our hotline @ 62889190...

Users have to ensure your Kadeka products are placed in the cooling area / away from heat-producing appliances / out of direct sunlight. Sufficient ventilation near compressor area is essential too.